Product Series

FINGER JOINTING SERIES

> Semi-Auto Finger Jointing System

30 years of manufacturing experience
The most comprehensive range of finger jointing equipment

FJ-17

POWERFUL!
EXTRA HIGH SPEED!
HIGH EFFICIENCY!
Allows for checking product quality and eliminating defective product.
FEATURES

Semi-automatic operation.
Economically Priced!
High speed production.

  • More

    Right End FINGER SHAPER

    It combines three functions-trimming, shaping and gluing on right end of the workpiece.

    Table traverse is driven by air/hydraulic combination cylinder, assuring maximum stability.

    Close
  • More

    FINGER ASSEMBLER

    4For jointing two short sticks end to end to produce a longer one, up to 4.5 meters or 6 meters in length.

    Two-step sequence of finger assembler from feeding, multiple-step cut-off to pressing, outfeed is synchronized.

    Close
  • More

    Left End FINGER SHAPER

    It combines two functions-trimming, shaping in a unit on left end of the workpiece.

    Table traverse is driven by air/hydraulic combination cylinder, assuring maximum stability.

    Close
  • More

    HAND FEEDING TABLE

    This additional material loading roller table reduces the down time to minimum for workpiece feeding.

    Also, it lets operator to inspect the material quality without delay of material infeed.

    Close
SPECIFICATIONS

FINGER SHAPER

MODEL F-C57 F-C58
Max. working table width 450 mm 450 mm
Range of workpiece width 150 - 1000 mm 150 - 1000 mm
Range of workpiece height 20 - 160 mm 20 - 160 mm
Table moving speed Air/Oil cylinder variable speed 0 - 20 m/min 0 - 20 m/min
Trim saw motor 5 HP 5 HP
Shaper cutter motor 15 HP 15 HP
Material of Cutter Tungsten Carbide Tungsten Carbide
Dia. of Cutter (in/out) ø70 / ø160 mm ø70 / ø160 mm
Main Sawblade 3t x ø74 x ø255 (80T) 3t x ø74 x ø255 (80T)
Auxiliaryliary Sawblade 12t x ø74 x ø240 (20T) 12t x ø74 x ø240 (20T)
Dust hood outlet diameter 6" x 1, 4" x 1 6" x 1, 4" x 1
Machine dimensions (LxWxH) 1830 x 840 x 1300 mm 1950 x 840 x 1300 mm
Net weight 770 Kgs 780 Kgs
Noise level 88.2 Db 88.2 Db
Packing dimensions (LxHxW) 1930 x 940 x1250 mm 2050 x 940 x1250 mm
Gross weight 850 Kgs 860 Kgs
Gluing With glue applicator

* The above data are not binding to details as improvements are incorporated from time to time.

MANUAL FEEDING TABLE - F-D05

MODEL P1 P2
Table width 450 mm 450 mm
Roller sizes ø57 x 450 mm ø57 x 450 mm
Machine height 970 mm 970 mm
Machine length 1000 mm 1000 mm
Machine width 655 mm 750 mm
Packing dimensions (F-D05P1 + F-D05P2) 1000 x 19805 x 880 mm

* The above data are not binding to details as improvements are incorporated from time to time.

ASSEMBLE PRESS - A-05

MODEL 4.5M 6M
Available length of product 4500 mm 6200mm
Available thickness of product 20 - 60 mm 20 - 60 mm
Available width of product 20 - 160 mm 20 - 160 mm
Feeding speed 80 m/min 80 m/min
Product length capacity 4 ~ 6 pcs 5 pcs
Max. : assembly pressure 0 ~ 150 Kg/cm² 0 ~ 150 Kg/cm²
Feed drive motor 1 HP , 2 HP 1 HP , 2 HP
Hydraulic power unit 5 HP 5 HP
Cut-off saw 5 HP 5 HP
Dust hood outlet diameter 4" (101.6mm) 4" (101.6mm)
Machine dimensions (LxHxW) 7990 x 965 x 1350 mm 9690 x 965 x 1350 mm
Noise level 84 Db 84 Db
Packing dimensions (LxHxW) 6360 x 1065 x 1450 mm 8060 x 1065 x 1450 mm

* The above data are not binding to details as improvements are incorporated from time to time.

˄