FL-05
THREE INITIAL INFEED TABLES
| MODEL | F-I01 |
|---|---|
| Conveyor table width | 650 mm |
| Table height | 860 mm |
| Feed drive motor | 1 HP x 3 |
| Overall length | 3250 mm |
| Overall width | 860 mm |
| Overall height | 960 mm |
| Machine dimensions (LxWxH) | 3350 x 1175 x 960 mm |
| Packing dimensions (LxWxH) | 4190 x 1175 x 1780 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
FINGER SHAPER (Right End)
| MODEL | F-C05 |
|---|---|
| Max. working table width | 650 mm |
| Range of workpiece width | 150 - 1000 mm |
| Range of workpiece height | 20 - 160 mm |
| Table feed speed (Air/hydraulic combination cylinder) |
0 - 20 m/mm |
| Trim saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| Finger cutter speed | 5000 rpm |
| Scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| MOTOR HORSEPOWER | |
| For table drive | 1/2 HP |
| For scoring saw | 1 HP |
| For trimming saw | 10 HP |
| For finger cutter spindle | 20 HP |
| Finger cutter spindle dia. | ø50 mm |
| Finger cutter specif. (I.D./Max.O.D.) | ø70 / ø160 mm |
| Dust outlet diameter | 6" x 2 |
| Machine dimensions (LxHxW) | 3670 x 1905 x 2155 mm |
| Noise level | 88.2 Db |
| Packing dimensions (LxHxW) | 3810 x 2120 x 2270 mm |
* NOTE : ø50mm Clamping collars with various thickness for finger cutter are optional accessories to be ordered.
FINGER SHAPER (Left End)
| MODEL | F-C06 |
|---|---|
| Max. working table width | 650 mm |
| Range of workpiece length | 150 - 1000 mm |
| Range of workpiece height | 20 - 160 mm |
| Table feed speed (Air/hydraulic) | 0 ~ 20 m/mim |
| Trim saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| Finger cutter speed | 5000 rpm |
| Upper scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| Lower scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| MOTOR HORSEPOWER | |
| For table drive | 1/2 HP x 2 |
| For upper scoring saw | 1 HP |
| For lower scoring saw | 1 HP |
| For trimming saw | 10 HP |
| For finger cutter spindle | 20 HP |
| Finger cutter specif. (I.D./Max.O.D.) | ø70 / ø160 mm |
| Dust outlet diameter | 6" x 2 |
| Machine dimensions (LxHxW) | 4160 x 1905 x 2155 mm |
| Noise level | 88.2 Db |
| Packing dimensions (LxHxW) | 4855 x 2120 x 2270 mm |
* NOTE : ø50mm Clamping collars with various thickness for finger cutter are optional accessories to be ordered.
MANUAL WORKPIECE TURNOVER (on model F-D11)
| MODEL | F-D11 |
|---|---|
| Conveyor table width | 650 mm |
| Table height | 860 mm |
| Feed drive motor | 1 HP |
| Overall length | 1420 mm |
| Overall width | 1790 mm |
| Overall height | 975 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
CHAIN DRIVE PRE-PRESS ASSEMBLY STAND - F-T05
| MODEL | 3M | 6M |
|---|---|---|
| Max. pre-press length | 3000 mm | 6000 mm |
| Range of workpiece width | 20 - 200 mm | 20 - 200 mm |
| Range of workpiece height | 20 - 100 mm | 20 - 100 mm |
| Feed speed | 80 m/mim | 80 m/mim |
| MOTOR HORSEPOWER | ||
| For table drive | 2 HP | 2 HP |
| For left transmission | 2 HP | 2 HP |
| For right transmission | 2 HP | 2 HP |
| Machine dimensions (LxHxW) | 4130 x 1060 x 1000 mm | 7130 x 1060 x 1000 mm |
| Noise level | 70 Db | 70 Db |
| Packing dimensions (LxHxW) | 4230 x 1160 x 1100 mm | 7162 x 1275 x 1120 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
ASSEMBLE PRESS (DOUBLE SIDES PRESSING) - F-A03
| MODEL | 6M | 6.8M |
|---|---|---|
| Max. product length | 6200 mm | 6800 mm |
| Range of material width | 20 - 160 mm | 20 - 160 mm |
| Range of material height | 20 - 60 mm | 20 - 60 mm |
| Feed speed | 80 m/mim | 80 m/mim |
| Range of pressing pressure | 0 ~ 150 Kgs/cm² | 0 ~ 150 Kgs/cm² |
| Production rate | 5 pcs/mim | 5 pcs/mim |
| MOTOR HORSEPOWER | ||
| For feeding | 2 HP | 2 HP |
| For hydraulic pump | 7-1/2 HP | 7-1/2 HP |
| For sizing saw | 5 HP | 5 HP |
| Saw arbor diameter | ø1" (ø25.4mm) | ø1" (ø25.4mm) |
| Dust outlet diameter | 4" (101.6mm) | 4" (101.6mm) |
| Machine dimensions (LxHxW) | 7670 x 1370 x 1510 mm | 8270 x 1370 x 1510 mm |
| Noise level | 84 Db | 84 Db |
| Packing dimensions (LxHxW) | 7745 x 1585 x 1150 mm | 8345 x 1585 x 1150 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
FL-08
MULTI-STAGE INITIAL CONVEYOR TABLE
| MODEL | F-I29 |
|---|---|
| Conveyor table width | 600 mm |
| Table height | 875 mm |
| Feed drive motor | 1/2 HP |
| Overall length | 990 mm |
| Overall width | 840 mm |
* Additional units to expand the system are available upon request.
HAND FEEDING TABLE
| MODEL | F-D16 |
|---|---|
| Table width | 570 mm |
| Roller sizes | Ø57 x 570 mm |
| Machine height | 960 mm |
| Machine length | 1065 mm |
| Machine width | 890 mm |
* 1: The standard gluing device is roller type, the tenon depth is 12 mm.
* 2: Inject type gluing system can be installed upon request.
AUTO FINGER SHAPER (Right End)
| MODEL | F-C07 |
|---|---|
| Max. available width working table | 600 mm |
| Range of workpiece length | 150 - 900 mm |
| Range of workpiece height | 20 - 160 mm |
| Table moving speed | 3 ~ 4 carts/min. |
| Trimming saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| Finger cutter speed | 5000 rpm |
| Scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| POWER REQUIRED | |
| Table-drive motor | 1 HP |
| For conveyor motor | 1/2 HP |
| Scoring saw motor | 2 HP |
| Trim saw motor | 5 HP |
| Shaper cutter motor | 20 HP |
| Dia of Cutter (in/out) | ø70 / ø160 mm |
| Dust hood outlet diameter | 6" x 1.4" x 1 |
| Machine dimensions (LxWxH) | 2860 × 1390 × 1980 mm |
| Noise Value | 88.2 Db |
* The above data are not binding to details as improvements are incorporated from time to time.
AUTO FINGER SHAPER (Left End)
| MODEL | F-C08 |
|---|---|
| Max. available width working table | 600 mm |
| Range of workpiece length | 150 - 900 mm |
| Range of workpiece height | 20 - 160 mm |
| Table moving speed | 3 ~ 4 carts/min. |
| Trimming saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| Finger cutter speed | 5000 rpm |
| Scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| POWER REQUIRED | |
| Table-drive motor | 1 HP |
| For conveyor motor | 1/2 HP |
| Scoring saw motor | 2 HP x 2 |
| Trim saw motor | 5 HP |
| Shaper cutter motor | 20 HP |
| Dia of Cutter (in/out) | ø70 / ø160 mm |
| Dust hood outlet diameter | 6" x 1.4" x 1 |
| Machine dimensions (LxWxH) | 3270 × 1680 × 1980 mm |
| Noise Value | 88.2 Db |
* 1: The standard gluing device is roller type, the tenon depth is 12 mm.
* 2: Inject type gluing system can be installed upon request.
AUTO ASSEMBLY PRESS
| MODEL | F-A05-6 |
|---|---|
| Available length of product | 6200 mm |
| Available thickness of product | 20 - 60 mm |
| Available width of product | 20 - 160 mm |
| Feeding speed | 80 m/mim |
| Capacity length product | Max. 4 - 5 pcs/min |
| POWER REQUIRED | |
| Feed motor | 3 HP |
| Max. assembly pressure | 0 ~ 150 Kg/cm² |
| Hydraulic power unit | 5 HP |
| Cut-off saw | 5HP |
| Dust hood outlet diameter | 4" (101.6mm) |
| Machine dimensions (LxWxH) | 8610 × 1465 × 1545 mm |
| Noise Value | 84 Db |
* All specifications, dimensions and design characteristics are subject to change without prior notice.
FL-10A
FINGER SHAPER WITH SCORING
| MODEL | F-C32S | F-C31 |
|---|---|---|
| Max. working table width | 450 mm | 650 mm |
| Range of workpiece width | 150 - 700 mm | 150 - 1000 mm |
| Range of workpiece height | 30 - 160 mm | 30 - 160 mm |
| Trim saw speed | 2800 rpm (50hz), 3400rpm (60hz) | 2800 rpm (50hz), 3400rpm (60hz) |
| Finger cutter speed | 5000 rpm | 5000 rpm |
| Scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) | 2800 rpm (50hz), 3400rpm (60hz) |
| Upper scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) | 2800 rpm (50hz), 3400rpm (60hz) |
| Lower scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) | 2800 rpm (50hz), 3400rpm (60hz) |
| MOTOR HORSEPOWER | ||
| Table drive motor | 2 HP x 1 | 2 HP |
| For table drive | 1/2 HP x 3 | 1/2 HP x 3 |
| For scoring saw | 1 HP x 3 | 1 HP x 3 |
| For trim saw | 5 HP x 2 | 10 HP x 2 |
| For finger cutter spindle | 15 HP x 2 | 20 HP x 2 |
| Finger cutter specif. (I.D./Max.O.D.) | ø70 / ø160 mm | ø70 / ø160 mm |
| Dust outlet diameter | 6" x 4 | 6" x 4 |
| Machine dimensions (LxHxW) | 3450 x 2130 x 1700 mm | 3750 x 3070 x 1650 mm |
| Noise level | 88.2 Db | 88.2 Db |
| Packing dimensions (LxHxW) | 3550 x 2230 x 1800 mm | 4850 x 2130 x 1750 mm |
* NOTE : ø50mm Clamping collars with various thickness for finger cutter are optional accessories to be ordered.
FINGER ASSEMBLER CHOICE OF 4.5 OR 6 METERS - A-08
| MODEL | 4.5M | 6M |
|---|---|---|
| Max. product length | 4500 mm | 6200 mm |
| Range of material length | 150 - 160 mm | 150 - 160 mm |
| Range of material height | 30 - 60 mm | 30 - 60 mm |
| Feed speed | 80 m/mim | 80 m/mim |
| Range of pressing presure | 0 ~ 150 Kg/cm² | 0 ~ 150 Kg/cm² |
| Production rate | 5 pcs/mim | 3 - 4 pcs/mim |
| MOTOR HORSEPOWER | ||
| For feedinf | 2 HP x 1, 5 HP x 1 | 2 HP x 1, 5 HP x 1 |
| For hydraulic pump | 5 HP | 5 HP |
| For sizing saw | 5 HP | 5 HP |
| Sawblade specification | 3t x 25. 4x ø355 mm | 3t x 25. 4x ø355 mm |
| Dust outlet diameter | 4" (101.6mm) | 4" (101.6mm) |
| Machine dimensions (LxHxW) | 7990 x 13805 x 1400 mm | 9690 x 1380 x 1510 mm |
| Noise level | 84 Db | 84 Db |
| Packing dimensions (LxHxW) | 63605 x 1050 x 1500 mm | 8060 x 1050 x 1500 mm |
| Packing dimensions (LxHxW) | 3210 x 610 x 1180 mm | 3210 x 610 x 1180 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
ROLLER TYPE CONVEYOR TABLE (Standard)
| MODEL | F-D09 | F-D11 |
|---|---|---|
| Conveyor table width | 450 mm | 650 mm |
| Table height | 860 mm | 860 mm |
| Feed drive motor | 1 HP | 1 HP |
| Overall length | 1420 mm | 1420 mm |
| Overall width | 1390 mm | 1790 mm |
| Overall height | 975 mm | 975 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
ROLLER TYPE CONVEYOR TABLE (CE - Standard)
| MODEL | F-I05 | F-I08 |
|---|---|---|
| Conveyor table width | 450 mm | 650 mm |
| Table height | 970 mm | 970 mm |
| Overall length | 700 mm | 700 mm |
| Overall width | 560 mm | 860 mm |
| Overall height | 960 mm | 960 mm |
| Packing dimensions (LxHxW) | 800 x 1020 x 660 mm | 800 x 1020 x 960 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
FL-24
FINGER SHAPER
| MODEL | F-C03 |
|---|---|
| Max. width for working table | 450 mm |
| Range of material length | 90 - 700 mm |
| Range of material width | 30 - 160 mm |
| Working table moving speed | 2 ~ 3 cycle/min |
| Trimming saw speed | 2800 rpm (50hz), 3400 rpm (60hz) |
| Finger cutter speed | 5000 rpm |
| Scoring saw speed | 2800 rpm (50hz), 3400rpm (60hz) |
| MOTOR HORSEPOWER | |
| Working table motor | 1 HP |
| Auto switching motor | 1/4 HP |
| Conveyer belt motor | 1/2 HP x 3 / 90 W x 2 |
| Scoring saw motor | 1 HP x 2 |
| Trimming saw motor | 3 HP |
| Finger cutter motor | 7-1/2 HP |
| Finger cutter diameter | ø70 / ø160 mm |
| Dust outlet diameter | 6” x 1, 4” x 1, 3” x 2 |
| Machine dimensions (LxHxW) | 3600 x 1740 x 4750 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
FINGER ASSEMBLER - F-A17
| MODEL | 2.5M | 16' |
|---|---|---|
| Length of product | 2500 mm | 4877 mm |
| Range of material thickness | 20 - 60 mm | 20 - 60 mm |
| Range of material width | 20 - 160 mm | 20 - 160 mm |
| MOTOR HORSEPOWER | ||
| Material feeding motor | 2 HP, 1 HP | 2 HP, 1 HP |
| Range of pressing pressure | 0 ~ 100 Kg/cm² | 0 ~ 100 Kg/cm² |
| Hydraulic pump motor | 3 HP | 5 HP |
| Sizing saw motor | 5 HP | 5 HP |
| Dust outlet diameter | 4” (101.6mm) | 4” (101.6mm) |
| Machine dimensions (LxHxW) | 5130 x 1400 x 1520 mm | 7500 x 1400 x 1520 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
INTIAL AUTOMATIC FEEDING TABLE
| MODEL | F-I17 |
|---|---|
| Max. width for working table | 450 mm |
| Max. material length | 700 mm |
| Material feeding motor | 1/2 HP |
| Length of working table | 730 mm |
| Width of working table | 660 mm |
| Height of material width | 960 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
MANUAL FEEDING TABLE
| MODEL | F-D15 |
|---|---|
| Max. width for working table | 450 mm |
| Max. material length | 700 mm |
| Length of working table | 710 mm |
| Width of working table | 830 mm |
| Height of material width | 960 mm |
* The above data are not binding to details as improvements are incorporated from time to time.
