FJ-15
指型機
型號 | F-C51 (Left) / F-C52 (Right) |
---|---|
最大工作台寬度 | 17 21/32" (450mm) |
工作木料寬度範圍 | 4 1/2" ~ 39 11/16" (115~1000mm) |
工作木料高度範圍 | 1" ~ 6 9/32" (25~160mm) |
馬力需求 | |
切齊鋸轉速 | 5 HP, 5 HP |
指型刀轉速 | 7 1/2 HP, 7 1/2 HP |
木削出料孔直徑 | 6" x 1, 4" x 2 |
機器尺寸 (長x寬x高) | 70" x 33" x 55" (1780x840x1400mm) |
加包材後尺寸 (長x寬x高) | 74" x 37" x 61" (1880x940x1550mm) |
淨重 | 740 Kgs |
毛重 | 820 Kgs |
* 以上數據會隨著改良做變更,恕不另行通知!
* 建議使用5馬力的空氣壓縮機
* 選購配備: F-D05 滾輪台
膠糊機
型號 | F-G01 |
---|---|
最大工作木料寬度 | 6" (152mm) |
機器尺寸 (長x寬x高) | 24" x 16 1/2" x 33" (610x420x840mm) |
加包材後尺寸 (長x寬x高) | 25 1/2" x 18 1/2" x 39 11/16" (650x470x1000mm) |
淨重 | 78.5 Kgs |
毛重 | 100 Kgs |
* 以上數據會隨著改良做變更,恕不另行通知!
* 建議使用5馬力的空氣壓縮機
* 選購配備: F-D05 滾輪台
自動接榫機
型號 | F-A07 |
---|---|
最大成品長度 | 177" (4.5M) |
最大成品厚度 | 2 13/32" (60mm) |
最大成品寬度 | 6 9/32" (160mm) |
接榫壓力 | 0 ~ 100 Kg/cm² |
液壓馬力 | 5 HP, 3 HP |
馬力需求 | |
切斷鋸馬力 | 5HP (3ph), 5 HP (1ph) |
機器尺寸 (長x寬x高) | 262" x 37 3/8" x 55" (6650x950x1400mm) |
加包材後尺寸 (長x寬x高) | 291" x 42" x 61" (7400x1065x1550mm) |
淨重 | 1250 Kgs |
毛重 | 1350 Kgs |
* 以上數據會隨著改良做變更,恕不另行通知!
* 建議使用5馬力的空氣壓縮機
* 選購配備: F-D05 滾輪台
FJ-16
指型機
型號 | F-C51 |
---|---|
最大工作台寬度 | 17 21/32" (450mm) |
工作木料寬度範圍 | 4 1/2" ~ 39 11/16" (115~1000mm) |
工作木料高度範圍 | 1" ~ 6 9/32" (25~160mm) |
馬力需求 | |
切齊鋸轉速 | 5 HP, 5 HP |
指型刀轉速 | 7 1/2 HP, 7 1/2 HP |
木削出料孔直徑 | 6" x 1, 4" x 2 |
機器尺寸 (長x寬x高) | 70" x 33" x 55" (1780x840x1400mm) |
加包材後尺寸 (長x寬x高) | 74" x 37" x 61" (1880x940x1550mm) |
淨重 | 740 Kgs |
毛重 | 820 Kgs |
* 以上數據會隨著改良做變更,恕不另行通知!
* 建議使用5馬力的空氣壓縮機
* 選購配備: F-D05 滾輪台
膠糊機
型號 | F-G01 |
---|---|
最大工作木料寬度 | 6" (152mm) |
機器尺寸 (長x寬x高) | 24" x 16 1/2" x 33" (610x420x840mm) |
加包材後尺寸 (長x寬x高) | 25 1/2" x 18 1/2" x 39 11/16" (650x470x1000mm) |
淨重 | 78.5 Kgs |
毛重 | 100 Kgs |
* 以上數據會隨著改良做變更,恕不另行通知!
* 建議使用5馬力的空氣壓縮機
* 選購配備: F-D05 滾輪台
自動接榫機
型號 | F-A06 |
---|---|
最大成品長度 | 4.5 M |
最大成品厚度 | 20 - 60 mm |
最大成品寬度 | 20 - 160 mm |
接榫壓力 | 0 - 10 kg/cm |
液壓馬力 | 2 HP - 3 HP |
馬力需求 | |
切斷鋸馬力 | 2 HP |
機器尺寸 (長x寬x高) | 5930 x 650 x 1400 mm |
加包材後尺寸 (長x寬x高) | 6030 x 750 x 1550 mm |
* 以上數據會隨著改良做變更,恕不另行通知!